- Long Beach, CA
- Salt Lake City, UT
- Oakland, CA
- Salt Lake City, UT
- Sarnia, ON
For more than 20 years, Trinity Consultants has assisted facilities in the aerospace industry with regulatory compliance and environmental management issues.
Trinity has a long history of assisting facilities with their regulatory compliance and environmental management systems.
Trinity helps chemical and pharmaceutical manufacturers to achieve regulatory and environmental compliance.
Trinity provides dispersion modeling, permitting, and compliance support for coastal operations in the Outer Continental Shelf, Deepwater Ports, and liquefied natural gas terminals.
Trinity has assisted clients with nearly 500 power-related projects, offering an array of services.
Due to their nature, “general manufacturing” facilities are often faced with reviewing a wide range of regulations to determine applicability.
Trinity provides a variety of services to government entities, including environmental permitting and compliance management.
Trinity Consultants has long been committed to assisting lime and aggregates facilities with their regulatory compliance needs.
Trinity takes pride in understanding the regulatory issues affecting our clients’ facilities and their industry.
Oil and gas facilities must contend with a variety of regulatory compliance and environmental management demands.
Trinity helps petroleum refineries to achieve compliance with complex environmental regulatory requirements.
Trinity Consultants has long been committed to assisting cement facilities with their regulatory compliance and environmental management needs.
Trinity has extensive experience assisting the pulp and paper industry with its regulatory compliance and environmental management requirements.
Railroads are faced with rapidly evolving state, regional, and federal regulatory framework in the United States.
For more than 25 years, Trinity Consultants has assisted facilities in the semiconductor industry.
Trinity prepares hundreds of air quality compliance reports for landfills and industrial facilities across the United States on an annual basis.
Trinity Consultants has performed nearly 800 environmental permitting and compliance projects for clients with terminal operations, providing cost-effective, timely solutions that enhance compliance while maintaining operational flexibility.
For nearly 30 years, Trinity Consultants has assisted facilities such as those in the highly regulated wood products industry.
On February 4, 2019, EPA proposed amendments to 40 CFR Part 63, Subpart NNNNN, National Emission Standards for Hazardous Air Pollutants (NESHAP) from the Hydrochloric Acid Production (referred to as HCl MACT). EPA anticipates that the proposed »
On March 1st, 2019, the Oregon Department of Environmental Quality (DEQ) released the Cleaner Air Oregon (CAO) prioritization results, which identified facilities in Oregon that will likely be called into the program during the first 12 months »
In January 2019, Trinity Consultants (Trinity) acquired The Redstone Group (Redstone), a consulting services provider of international chemical control laws, and EHS auditing, compliance and permitting.Redstone has deep expertise and advises clients »
The ISO 45001:2018 Occupational Health and Safety Management System (OHSMS) standard was published in March 2018, replacing the OHSAS 18001:2007 OHSMS standard. Publication of this new standard is part of a broader effort by the International »
Leak Detection and Repair (LDAR) involves finding facility components that are leaking and fixing them. The U.S. Environmental Protection Agency (EPA) has a long history of regulating industries (such as petroleum refining and chemical »
Trinity's Environmental Quarterly (EQ) magazine covers environmental regulatory developments as well as topics related to corporate environmental performance.
all issues from 2009
These papers, presentations, and articles were authored by the staff of Trinity Consultants for presentation at various conferences.
all papers & presentations
Since its founding in 1974, Trinity has expanded its geographic footprint and breadth of services. We attribute our continued growth to a focus on cornerstone values of top-notch technical performance and excellence in client service.
EPA is proposing to approve a SIP revision submitted June 26, 2018 by ADEM. EPA is proposing to approve Alabama's determination that the State's regional haze plan is adequate to meet »
EPA is proposing to authorize changes to the Alabama hazardous waste program. This proposed rule is in response to ADEM applications dated November 2, 2016 and May 11, 2018, seeking »
The EPA has approved portions of the State Implementation Plan (SIP) revisions and the Title V Operating Permit Program revisions submitted May 19, 2017 by ADEM. The revisions are related to »
EPA published the final rule, "Protection of Stratospheric Ozone: Update to the Refrigerant Management Requirements under the Clean Air Act" in the Federal Register (81 FR 82272), 40 CFR Part »
Air emission inventories for the 2016 calendar year are due June 30, 2017. The Alabama Department of Environmental Management (ADEM) requires that facilities complete the emission inventories »
On March 20, 2017, Alabama received final authorization from EPA to change to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA). Specifically, Alabama will »
Environmental managers should be planning and budgeting for 2016 to be a year requiring submittal of reports to EPA for the Chemical Data Reporting (CDR) program under the Federal Toxic »
On March 20, 2017, Alabama received final authorization from EPA to change to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA). Specifically, Alabama will require generators to maintain in their onsite records, »
Environmental managers should be planning and budgeting for 2016 to be a year requiring submittal of reports to EPA for the Chemical Data Reporting (CDR) program under the Federal Toxic Substances Control Act (TSCA). This reporting requirement is »
On July 31, 2015, the Alabama Department of Environmental Management (ADEM) revised the Air Emissions Electronic Reporting System (AEERS) Responsible Official Registration Form (Form #038). The AEERS system is coming soon to ADEM's e-Government »
The deadline for completion of the energy assessments required for boilers and process heaters by EPA's Boiler MACT (40 CFR 63, Subpart DDDDD) is rapidly approaching. The Boiler MACT requires a one-time energy assessment (EA) for major sources to »
Alabama Department of Environmental Management (ADEM) is in the process of converting to an Air Emissions Electronic Reporting System (AEERS). Currently, emissions estimates are submitted as paper reports where the data must then be entered by ADEM »
On July 24th, ADEM notified the public of their intention to amend ADEM Administrative Code Rule 335-3-14-.04, 335-3-16-.01, and Appendix I. Revisions are being proposed to the current construction permit regulations and Major Source Operating »
In June 2014, the Alabama Department of Environmental Management (ADEM) issued two pertinent reports, which include:2013 Alabama Regional Haze Mid-Course Review. On July 15, 2008, ADEM submitted its Regional Haze State Implementation Plan (SIP) to »
On April 1, 2014, the Alabama Department of Environmental Management (ADEM) revised the state’s Air Division – Air Pollution Control Program Regulations to incorporate the Emission Guidelines for Existing Commercial and Industrial Solid Waste »
The 2014 environmental reporting season is upon us. Here are some deadline reminders to help you plan for the reporting season for facilities located in Alabama:Toxic Release Inventory is due July 1, 2014. (Federal due date)Payment of ADEM »
The 2014 environmental reporting season is upon us. Here are some deadline reminders to help you plan for the reporting season for facilities located in Alabama:Annual Certification Form (ADEM form 324) for Discharges Associated with Petroleum »
In December 2013, the Jefferson County Department of Health's Air Pollution Control Program posted two videos for facilities and the public to better understand the Title V permitting process. Both facilities and public located in the »
On December 24, 2013, U.S. EPA released an updated version of the AERMOD model, as well as the meteorological preprocessing program, AERMET.http://www.epa.gov/ttn/scram/dispersion_prefrec.htm#aermodThe new versions are not anticipated to impact »
On September 24, 2013, the Alabama Department of Environmental Management (ADEM) revised the state's Air Division - Air Pollution Control Program Regulations. For a copy of the revised regulations, visit: »
On October 3, 2013, a one day Alabama air regulatory update conference will be held in Montgomery, Alabama. The conference is co-sponsored by the Alabama Department of Environmental Management (ADEM) Air Division and the Air & Waste Management »
On July 30, 2013, the Alabama Department of Environmental Management (ADEM) revised the state's General Administration Regulations. Of interest to facilities with air permits are the changes to the permit application fees (including a change to the »
On May 28, 2013, the Alabama Department of Environmental Management (ADEM) revised the state's Air Division - Air Pollution Control Program Regulations. For a copy of the revised regulations, visit: »
Alabama Department of Environmental Management (ADEM) will be hosting several public hearings in March 2013. One of particular interest is related to ADEM’s Air Division and is described below: • March 28, 2013 at 10:00 a.m.: The hearing will »
EPA is proposing to approve submissions from Alabama for including revisions to the state implementation plan (SIP). The revisions pertain to the Clean Air Act (CAA) requirements for the 1997 annual and 2006 24-hour fine particulate matter (PM2.5) »